If you are looking for the purchase and bulk order of metal cans, gallons or industrial cans with precise dimensions, standard sheet thickness (0.22 to 0.26 mm) and exclusive printing quality in Tehran, "Capital Can Manufacturing" under the management of Peyman Alidost performs all stages from lithography and exclusive mold making to final production in Ferdowsieh Shahriar Industrial Estate. Choosing a standard metal packaging for products such as paint, oil, resin or Halals are more than a beautiful appearance; An improper seam or the wrong choice of sheet material can compromise the entire quality of your product in storage or during transportation. In this article, we examine what points you should know before placing an order for industrial metal containers to avoid costly mistakes.
capital canning; Production and printing of all kinds of metal cans and Aleppo in Tehran
Choosing the right metal packaging for industrial and chemical products is more than an appearance choice; An uneven seam, inappropriate sheet thickness or wrong choice of door type can compromise the quality of interior materials and increase logistics costs. Producers of paint, oil, resin, glue and chemical products in Tehran and all over the country know very well that metal packaging must be designed in sync with the protection standards and production line conditions. In the capital canning under the management of Peyman Alidost, the process of design, lithography, printing on sheet and production of metal containers is carried out by relying on field experience and technical standards so that buyers can send their product to the market with confidence in the safety and durability of the container.
What points should we know before ordering industrial metal cans?
Metal cans and industrial bottles must be compatible with the nature of the content, storage conditions, transportation and filling equipment of the production line. Careful examination of the thickness of the sheet, the dimensions of the litter, the type of door and the internal coating minimizes the risks of damage and leakage.
In the metal packaging industry, the difference in the appearance of two containers does not mean that their use is the same. Materials such as solvents, paints, epoxies and greases require different coatings on the inner surface of the can. We have observed in the review of various projects that neglecting the compatibility of the metal body with chemicals can lead to corrosion of the sheet or a change in the quality of the content.
To start the production and ordering process, it is necessary to evaluate these indicators:
- Type of product (chemical, paint, oil, powder, or fancy containers)
- Literature and exact capacity required
- Type of lid and packaging system (simple, double, intestinal or Clargers)
- Type of printing and exclusive design on the sheet
- Storage conditions, temperature and level of resistance to impact and pressure
Technical specifications and variety of metal containers in the capital
Metal containers produced in capital canning include all kinds of round cans (quart, kilo or quart, four- to six-liter gallons), empty cans and industrial containers, each of which is made with a standard sheet thickness (usually from 0.22 to 0.26 mm based on the volume).
Variety of dimensions and volume in round and industrial cans
Changing the height of the cans is done based on the volume or literage requested by the customer, and the standard diameters of the body are pressed and sewn with high engineering precision.
In industrial production lines, it is possible to make containers with different standard diameters (such as diameters of 73, 99, 105, 110, 165 and 180 mm). Also, if the customer needs a special template or custom dimensions, the template design department of the collection protects it from being offered to competitors by making exclusive templates, so that the identity of the brand packaging is preserved.
Steps of preparation, printing and varnishing of metal sheet
The quality of appearance and durability of the printing on Aleppo and metal cans is the result of the precise coordination of the steps of lithography, printing, varnishing and then sending the sheet to the production line.
After the final approval of the customer's graphic design, the film and zinc preparation steps are carried out, and the metal sheets receive the printing layer and protective varnish before entering the press and forming section. This process prevents rusting of the body and damage to the printed design due to environmental factors.
Type of metal container | Main applications | Common technical specifications |
|---|---|---|
Quarter cans and kilo | paint, oil, glue, chemicals | diameters 73 and 99 mm, standard sheet |
4 to 6 liter gallons | resin, epoxy, solvent, grease | single or double doors, appropriate thickness |
empty cans | food, chemical and Powdered | Custom dimensions, full content emptying |
Fancy and special containers | Luxury and industrial packaging | Exclusive template design and exclusive printing |
Common mistakes that increase the cost of ordering cans
According to my years of experience in capital canning, I have seen that many of the problems of employers are caused by placing orders without considering the filling conditions or the non-compliance of the thickness of the sheet with the weight of the product. Choosing the wrong door type or neglecting the timing of lithography and making zinc are other common challenges.
To prevent these problems, it will be helpful to observe the following tips:
- Determining the type of content: Before ordering, be sure to declare the acidic, oily or chemical nature of the product so that the inner varnish coating can be chosen correctly.
- Exact calculation of the volume and height: Instead of visual fit, check the useful volume of the container and how to arrange it in the carton or pallet. Whether it needs special sealing systems or not.
- Considering the printing preparation time: Include the time needed to prepare the film, zinc, printing and varnishing of the sheet in your production planning.
- Pre-production sample request: For bulk orders or special dimensions, be sure to receive the prototype and test it in real conditions.
In the field of quality control standards for metal containers and packaging safety, the review of international technical guidelines can be a good guide for adjusting the pressure resistance of the bodies.
Procedures for order registration and delivery in capital canning
Registration of the order in the capital canning (Tehran, Fase Shirazi St.) is done with the least waste of time and based on accurate needs assessment. We try to go through the process of registration until the delivery of the product with full transparency.
- Sending request and initial consultation: Announcing the product specifications, size and intended use to the collection experts.
- Technical review and design: Determination of sheet thickness, standard diameters or exclusive mold design if needed.
- Design and printing (lithography): Preparing film, zinc and performing printing and varnishing on metal sheets.
- Production and control Quality: Manufacturing of cans or Aleppo in the production unit (Ferdosieh Shahriar Industrial Town) with monitoring of the accuracy of seams and body strength.
- Timely delivery: Packing and sending orders to the customer's warehouse or factory in Tehran and other cities of the country.
To read more about the specifications of the containers, it is recommended to check the articles Guide to choosing industrial paint and resin cans, Printing and varnishing standards on metal sheet and Advantages of using fully empty cans in the relevant sections of the site.
Frequently asked questions of customers
Summary and order registration
Choosing resistant and standard metal packaging is a direct investment in maintaining the quality of your product and the reputation of your brand. If you are looking for durable metal containers, high-quality printing and accurate manufacturing based on the actual needs of your production line, it is important to carefully check the dimensions, sheet thickness and consult with experts in this field.
Peman Alidost and the capital canning team in Tehran are ready to provide you with the most reliable packaging solution by providing expert advice and production of cans, gallons and industrial cans. To inquire about the price, coordinate custom samples or place an order, you can contact the contact numbers of the collection right now.


